Precisely and professionally made drop-in MOSFET system designed for Airsoft Electric Guns with V2 gearbox.
This system increases the AEG’s rate of fire and limits unnecessary battery usage.
In automatic-fire mode, the piston stops in a random position due to the gearbox design.
For proper operation, it is necessary to have a functional gearbox cut-off lever, selector plate, reverse latch, trigger, and trigger block, as it has the standard gearbox.
Device features:
Pre-soldered wires allow for faster and easier installation into the V2-type gearbox. Wires are provided with the additional length for user adaptation.
Two high-quality AWG16 1,5mm wires with a length of 300 and 700 mm. Blue AWG24 0.34qmm wire with protective coating insulation sleeve and a length of 1000 mm.
Cables are designed to lead into the stock, but wires can be adapted to the front if the situation warrants.
Mainboard covered with conformal coating for water resistance.
Designed for springs up to M160 (equivalent for current 75A single-shot fire or 25A burst fire for max. 30s).
Ideal for popular batteries up to 17V (Ni-xx 8.4 – 12V, Li-Po 7.4 – 14.8V).
No current consumption in the idle mode and no sparking on the switch contacts.
Parima kogemuse pakkumiseks kasutame seadmeteabe salvestamiseks ja/või sellele juurdepääsemiseks selliseid tehnoloogiaid nagu küpsised. Nende tehnoloogiatega nõustumine võimaldab meil töödelda selliseid andmeid nagu sirvimiskäitumine või unikaalsed ID-d sellel saidil. Nõusoleku mittenõustumine või tagasivõtmine võib teatud funktsioone ja funktsioone kahjustada.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.