Micro Mosfet II with Wiring (Jefftron)
18.90 €
Precisely and professionally made drop-in MOSFET system designed for Airsoft Electric Guns.
This system increases the AEG’s rate of fire and limits unnecessary battery usage.
In automatic-fire mode, the piston stops in a random position due to the gearbox design.
For proper operation, it is necessary to have a functional gearbox cut-off lever, selector plate, reverse latch, trigger, and trigger block, as it has the standard gearbox.
Device features:
- Pre-soldered wires allow for faster and easier installation into the V2-type gearbox. Wires are provided with the additional length for user adaptation.
- Two high-quality AWG16 1,5mm power wires with a length of 500mm and AWG22 0.34qmm signal wire with protective coating insulation sleeve and a length of 1000mm.
- Additional 1000mm of 1,5qmm AWG16 red wire.
- Mainboard covered with conformal coating for water resistance.
- Designed for springs up to M160 (equivalent for current 75A single-shot fire or 25A burst fire for max. 30s).
- Ideal for popular batteries up to 17V (Ni-xx 8.4 – 12V, Li-Po 7.4 – 14.8V).
- No current consumption in the idle mode and no sparking on the switch contacts.
- Overall dimensions of 15x7x5mm.
Saadaval eeltellides