Drop-in Mosfet V3

Precisely and professionally made drop-in MOSFET system designed for Airsoft Electric Guns with V3 gearbox installed in the AK-type replicas.

This system increases the AEG’s rate of fire and limits unnecessary battery usage.

In automatic-fire mode, the piston stops in a random position due to the gearbox design.

For proper operation, it is necessary to have a functional gearbox cut-off lever, selector plate, reverse latch, trigger, and trigger block, as it has the standard gearbox.

Device features:

• Pre-soldered wires allow for faster and easier installation into the replica. Wires are designed for use in the AK-type AEG or with the battery above the gearbox.
• High-quality AWG16 1,5mm and signal blue wire AWG22 0.34qmm with protective coating insulation sleeve.
• Mainboard covered with conformal coating for water resistance.
• Designed for springs up to M160 (equivalent for current 75A single-shot fire or 25A burst fire for max. 30s).
• Ideal for popular batteries up to 17V (Ni-xx 8.4 – 12V, Li-Po 7.4 – 14.8V).
• No current consumption in the idle mode and no sparking on the switch contacts.